Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost their key to their car might be concerned about the expense and inconvenience of adding a new one. There is a way to cut down on these costs by creating your own key fob.
To accomplish this, you'll need an screwdriver with a flat head. Insert the flathead screwdriver in the slot that is located in the middle of the case and slowly open it.
Cost
Some used cars only have one key, and the majority of SAABs have two keys. In this situation the owner will need to purchase the new key. This can be costly. Fortunately, there are many ways to save money on this procedure. If you only need to replace the key fob case and not the badge or emergency key it is possible to save money by buying a used one from a dealer. These cases do not include the emergency badge or key, and they tend to wear out fast.
You must also pay for the installation and programming of the TWICE module. These costs can quickly become expensive particularly if you have no spare key.
It is essential that you always have at least two keys for your vehicle. This way, if lose the only key that works it won't leave you without transportation.
It's not as hard as it may seem to add another key for the Saab 9-3. The only problem is that you have to pair the key with the car's computers. This can be done through an authorized dealer, but it might take a while to schedule an appointment. Luckily, you can locate the information you need online to assist you with the procedure.
Installation
Most Saab vehicles built after 1995 come with a special immobilizer system that makes use of a key-fob to control the car's engine. The system also controls door locks as well as remote functions of the vehicle. It is vital to have an extra key in case you lose the original key and risking having your vehicle stolen. If you lose your only Saab working key, there are a variety of ways to replace it without having to pay for costly dealer service.
The first step is to prepare the new key fob. This can be done by using the flathead screwdriver for prying the case open. Insert the screwdriver into the small opening in the middle of the case and gently move the screwdriver. If you're having trouble, try using different angles. Once you've opened up the case, you can remove the electronics and put them in a brand new fob case.
Once you have the replacement fob and the key, you can begin the process of programming. You will need to connect your Tech2 to the computer and follow the steps for NG 9-3, either with or without the transponder. It is advised to get a replacement unit TWICE that has been connected to the correct transponder and key. You can locate this type of unit on the internet, but you should make sure that the replacement is an OEM part.
Programming
Tech 2 Tech 2 is required to add an additional key to a Saab 9-3. This also involves programming the vehicle to recognize the new keys. This procedure is more complex than simply copying the metal keys, and should be handled by a professional to avoid harming the vehicle's electronic system. If you're thinking about adding an additional key to your car, you should try to get it done as soon as you can. In the event of delay, it could result in higher costs in the future.
In addition to putting in the replacement key, you'll have to replace the CIM or TWICE module. This is a mail-order process and is not something you can purchase from an aftermarket vendor. Depending on the car model, the cost can be quite expensive.
There's an alternative to the dealer that is charging you the highest dollar to replace your car computer. S.A. Locksmith & Security will re-program your Saab computer to prepare it for the new key. This will help you save the expense of purchasing a brand new car computer. This service is fast and cost-effective, as well as easy. You will save up to 50% on what the dealer would charge. This is a fantastic solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen was among the most distinctive cars that ever wore the Saab badge. It was an Scandinavian front-drive, fighter jet-inspired machine that was fast and fun to drive. Although many other Saab models were made after it, none were as quirky.
It's important that you replace your Saab 9-3's keys fob as soon as you lose it. Saab vehicles come with an immobilizer system that requires a special key for starting. The replacement process is fairly straightforward if you have an extra key, however it can be costly and time-consuming if there isn't a spare.
You can save money if you purchase a used key fob replacement and then have it programmed locally by locksmiths. But, be cautious about buying used keys on eBay or other online retailers. They might not be authentic and you may end having to pay more in the long run.
Anyone can easily remove the electronics and battery from an old key fob by using an inexpensive screwdriver with a flat head. Be sure not to scratch the tiny electronic components within the case. Avoid pouring replacement saab key into the case since this could cause damage. Also, do not purchase a key cloned from any retailer that sells aftermarket keys as they may not be paired with the CIM of your vehicle.